HT Alinco DJ 596

HT Alinco DJ-596MKII Specifications General Frequency range E: TX& RX 144-145.995MHz 430-439.995MHz T: TX: 144-147.995MHz / 420-449.995MHz RX: 136-173.995MHz / 400-511.995MHz Operating mode F2( 1200bps) / 8K50F3E/ 16k0F3E/ F1E( Op: digital) Channel steps 5, 10, 12.5, 15, 20, 25, 30KHz Memory channel 100 channels + 2 quick recall ( CALL) Antenna Connector BNC ( 50ohm unbalanced) Frequency stability + / - 2.5ppm TCXO Power supply requirement 6.0 - 15.0V DC negative ground Current drain Approx. 1.2A TX VHF at 13.8V DC Approx. 1.4A TX UHF at 13.8V DC Approx. 75mA squelched Approx. 25mA battery save ON Usable temperature range -10 - + 60c ( 14 - 140F) Dimensions ( w/ o projection EBP-50N battery included) 56mm( W) x 124mm( H) x 36.5mm( D) 2.2” ( W) x 4.883( H) x 1.443( D) Weight Approx. 310g ( 11oz) with EBP-50N and EA98 whip antenna CTCSS tone encoder/ decoder 39 tones Digital Coded Squelch encoder/ decoder 104 codes Transmitter Output power Approx. 5W at 13.8V DC V/ UHF Approx. 4.5W VHF with 9.6V packs Approx. 4.0W UHF with 9.6V packs Approx. 2.5W V/ UHF with EBP-56N Approx. 0.8W Low position V/ UHF Modulation system Variable reactance frequency modulation Spurious emission Less than -60 dB Maximum frequency deviation + / - 5 KHz Receiver Receive system Double-conversion superheterodyne Sensitivity ( -12dB SINAD) Less than -15.0dBu Selectivity -6dB: 12KHz or more -60dB: 30KHz or less Audio output power More than 200mW( 8ohm 10% THD)