Spectrum Analyzer Atten AT6011

Product Description - Spectrum Analyzer ATTEN AT6011 : AT6011 Spectrum Analyzer is a low cost, high performance digital synthesized RF measurement instrument with Tracking Generator and frequency upto 1GHz. It uses VCO phase locked technique. It is rugged and easy to control operating panel. It’ s the most stable Spectrum Analyzer you can find with good noise floor performance. AT6000 Series spectrum analyzer have exceed 1GHZ frequency ( 0.15 ~ 1050MHZ) 50MHZ step frequency and fine adjust to the center frequency, compose the convenient frequency-domain test. AT6011 has the tracking signal generator. Features: • Compact and Easy to be carry • Frequency range : 0.15~ 1050MHZ • 16bit half numerical display ( center frequency, 0.01MHZ resolvability) • -100~ + 13dbm amplitude range, 20KHz, 400KHz • Intermediate frequency and 4khz video filter. • Phase Locked loop technique • Excellent Noise floor performance • Tracking signal generator. Model: • AT6011 1GHz with Tracking Generator Technical Specifications: Frequency range: 0.15 to 1050MHz CF adjust range: 0~ 1050MHz Resolution of frequency display: 10kHz RBW: 400kHz and 20kHz Video filter bandwidth: 4kHz Average noise level: - 90dBm ( 20kHz Bandwidth) Amplitude range -100dBm to + 10dBm Sweep rate 40Hz Reference level -30dBm to + 10dBm Frequency generator TCXO DDS Input attenuator accuracy + / -1dB/ 10dB Signal input connector N type Stability + / -5ppm/ year Aging + / -1ppm/ year Accuracy + / -10kHz Disp lay CRT 8x10 Div Third order intermod -90dBc ( two signals > 3MHz apart) Scan width 100kHz/ div~ 100MHz/ div, 1-2-5 steps and 0 step Log scale fidelity + / -2dB ( CF: 500MHz 10dBm attn zero scan RBW 400kHz ) 500MHz AT6011 Tracking Generator Specifications: • Output: N connector • Output Impedance: 50ou • Frequency range: 0.15MHz~ 1050MHz • Output level range: -50dBm~ + 0dBm ( in 10dB steps and var) • Frequency response: ± 2dB • Output attenuator: 0~ 40dBm ( 4* 10db) Tracking generator: A basic and very useful addition to a spectrum analyzer is a tracking generator. A tracking generator produces a RF signal on the exact frequency where the spectrum analyzer is receiving at the same time. A tracking generator therefore allows testing many passive and active RF circuits that do not produce any RF signals on their own, like filters, amplifiers etc. With an additional directional coupler or bridge, reflection measurements can be performed in the whole frequency range covered by the spectrum analyzer. Accessories: 1) Power cord; 2) 1 unit of BNC-BNC cable 3) test leads; 4) Antenna; 5) English manual